捷创力高仪器有限公司
品牌信息
业务电话:0731-85260926
技术支持:0731-85260926
公司传真:0731-85263946
网络支持:QQ-2582961985
E-mail: yujin.wu@miko.com.cn
公司地址:湖南省长沙市雨花区韶山南路亚商国际大厦A座2524室
 
软磁B-H分析仪 你当前的位置:首页 - 产品信息
日本岩崎 SY-8218-8219软磁交流B-H综合测试系统
所属类别:软磁B-H分析仪
产品简介:唯一被IEC认可的软磁B-H分析仪测试方法CROSS-POWER,完全符合IEC-62044-3的测试标准和与IEC溯源的中国国际GB./JB。在全球软磁最权威的研究机构、生产工厂,计量中心都以IWATSU 公司的B-H 做为标准方案。
  • 产品特点
  • 产品参数
  • 应用说明
  • 功能配置
  • 资源下载

B-H Analyzer SY-8218 / SY-8219

日本岩通计测全自动高精密软磁交流B-H综合测试系统:

Precise automatic core loss measurement in higher frequency

Soft magnetic components made of ferrite play an important role in electric components as they are used in a broad range of applications from low-frequency applications such as yokes for micromotors, to high-frequency applications such as flyback transformers, deflecting yokes, high-frequency transformers and magnetic heads. In actual operation, these magnetic components display characteristics different from DC magnetic characteristics or characteristics measured with an LCR meter.
B-H Analyzer SY-8218  
  • Test freq. : 10Hzto 10MHz (SY-8218) / 10Hzto 1MHz(SY-8219)
  • Appling signal waveform : Sinusoidal or Pulse (10Hz to 1MHz)
  • Input current : ±6A, maximum
  • Input voltage : ±200V, maximum
  • xcitation method : Automatic excitation

  • (at fixed Hm, BmI1m or V2m)

    Residual flux can be eliminated by degaussing with applying AC magnetic field
Measurement POD image without POD cover

仕様
Item Specification
Measurementmethod CROSS-POWER method (conformance to IEC62044-3)
MeasurementItem (Symbol) Max. Magnetic fluxdensity(Bm), Residual magneticflux density(Br), Max.Magneticfield strength(Hm), Coersiveforce(Hc), Rectangular ratio(Br/Bm), Relative amplitude permeability(μa), Core loss(Pc,Pcv,Pcm), Primary excitation current(I1m), Secondary induced voltage(V2m), Phase(θ), Total magnetic flux linkage(2φm), Apparent power(VA), Impedance permeability(μ;z), Complex permeability(μ',μ"), Loss coefficient(tanδ), Inductance(L), Resistance(R), Impedance(|Z|), Quality factor(Q), Total harmonic distortion(THD)
Waveformdisplay B-H curve,Excitation current, Induced voltage, Magnetic field, Magnetic flux density
Testfrequency Sinusoidal 10Hz to 10MHz(SY-8218)
10Hz to 1MHz(SY-8219)
Square 10Hz to 1MHz(Duty50)
Magneticfield signal detection Voltage drop at Non-inductive resister, Maximum currentat ±6A
Magnetic fluxdensity signal detection Voltage detection at induced voltage detection coil, Maximum signal detection voltage at ±200V
Digitizer 16bits (8192points / cycle)
Sample connection method 2 or 1 coil (winding) method selectable
Display 8.4" TFT-LCD SVGA 800x600pixels
Power AC100V to AC240V,50/60Hz, Approx. 130VA(MAX.)
Dimensions
Weight
Approx. 420W x 266H x 480D(mm)
Approx. 12.5kg
Externalmemory USB port for data storage
Accessories Referencesample, POD cover, AC coupler module, Power amplifier cable(BNC-BNC), OSC cable (SMA-BNC), Power cable, Operation manual(CD-ROM), Users guide

【选件】B-H Analyzer SY-8218 / SY-8219 

DC-bias test system  More about

Automatic test on power inductor properties with DC biasing

SY-960 / 961 / 962

  • DC bias current : 30A, max
  • AC Ripple current : ±6A, max
  • Test frequency (Sinusoidal) : 10kHz to 3MHz
  • Test frequency (Pulse) : 10kHz to 1MHz 
    (Duty10% - 90%)
DC-bias test system

Power amplifier  More about

Wide band and High power

HSA4101-IW

DC to 10MHz, ±1A Peak, ±71V Peak, 50VA

Power amplifier HSA4101-IW

HSA4014-IW

DC to 1MHz, ±5A Peak, ±75V Peak, 200VA

Power amplifier HSA4104-IW

IE-1125B

DC to 3MHz, ±5.2A Peak, ±140V Peak, 350VA

Power amplifier IE-1125

SY-911

OSC cable (BNC - SMA)

Cable to connect the IE-1125B and BH analyzer body

DC biasing source

SY-931

DC current : 10A, max.
Operation freq. : 1MHz, max.

DC biasing source SY-931

Temperature scanner system  More about

Temperature range : -30°C to 150°C, Sample 41pcs, max.

SY-320A sample 20pcs., max.

SY-321A sample 41pcs., max.

  • Test freq.
    : 10Hz to 5MHz (with SY-8218 mainframe)
    : 10Hz to 1MHz (with SY-8219 mainframe)
  • Input current : ±6A, max.
  • Input Voltage : ±200V, max.
  • Temp. range : -30°C to 150°C
Temperature scanner system

SY-510 / 511

Turntable (for setting samples on scanner mechanism)

20pcs : SY-510 (for SY-320A)
41pcs : SY-511 (for SY-321A)

Turntable

SY-512

Spare connection pin set


(for SY-320A / 321A)

Spare connection pin set

SY-910

Scanner connection cable


(Standard accessory for SY-320A / 321A)

Scanner connection cable SY-910

Single Sheet Test system  More about

Full automatic accurate test for single sheet shape samples such as Silicon-steel sheets, etc.

SY-956

  • Test frequency:10Hz to 20kHz
  • Applicable magnetic field strength : 10,000A/m, max.
  • Sample dimensions:Single sheet samples at ;
    36mm(L), min. / 35mm(W), max. and 3mm(t), max.
  • Introducing vertical single yoke current excitation type single sheet magnetic property characteristics test method
  • Yoke compensation function cancelling loss and other affection in Yoke
    (patent pending)
  • Constant pressing force on specimen
    (selectable from 16 kinds of force settings)
Single Sheet Test system

GPIB-USB converter

SY-509

(Standard accessory for SY-810)

SY-509

NI-GPIB-USB-HS GPIB Controller Supporting 
Hi-Speed USB

A USB-GPIB converter for use with controllers connected to PCs when the SY-810 remote control software is being used.

NI GPIB-USB-HS

Bulkhead adaptor

182766-01


(Standard accessory for SY-810)

182766-01

AC coupler

SY-504

10kHz AC coupler


(Standard accessory for SY-8218 / 8219)

SY-504

LF AC coupler

SY-514

AC coupler at fLc=300Hz(-3dB) to use in lower frequency than AC coupler SY-503 which provided as a standard accessory with BH analyzer mainframe.

fLc(cut-off freq.) : Approx. 300Hz
Input voltage : ±200V,max.
Input current : ±6A,max.
Connection cable : BNC cable(0.6m)

Accessories
LF AC coupler SY-514

Software  More about

Automatic test can be performed such as property test vs frequency, etc.

SY-810

Remote control software


SY-810

SY-811

Continuous test function
(Option for BH analyzer)


BH analyzer additional software

etc

Blank toroidal core SY-513

Blank toroidal shape casing for powder material or layered thin material donuts shape, etc.

Use case
SY-513

Equipment wagon  More about

MT-600L

Major items:
  • Slide pull-out table
  • Pull out for accessories
  • 4 wheel casters with lock function
  • Equipment tighten belt
  • Mountable weight :100kg, max.
  • Heigh t:Approx. 850mm
  • Table :Approx.590Wx775D(mm) fixed
  • Weigh t:Approx. 36kg
Equipment wagon MT-600L

关于我们产品信息应用解决方案技术支持与售后服务重点客户联系我们

 英国牛顿科技N4L -  日本岩通计测IWATSU - 英国LA - 德国PMK - 日本APOLLOWAVE - 德国 DR HUBERT  中国总代理商  

页面版权所有 长沙力高捷创仪器有限公司 《中华人民共和国电信与信息服务业务经营许可证》 编号:湘ICP备19020595号  

地址:湖南省 长沙市雨花区韶山南路亚商国际大厦A座2524室   联系电话: 0731-85260926  传真:0731-85263946

CASCADE射频微波探针|APOLLOWAVE半自动功率探针台探针卡|VITREK 安规/高压表|PEM CWT探头|PSM1700频率响应|PEARSON电流探头|IWATSU 曲线图示仪|PMK高压探头




收缩