捷创力高仪器有限公司
品牌信息
业务电话:0731-85260926
技术支持:0731-85260926
公司传真:0731-85263946
网络支持:QQ-2582961985
E-mail: yujin.wu@miko.com.cn
公司地址:湖南省长沙市雨花区韶山南路亚商国际大厦A座2524室
 
安规测试仪 你当前的位置:首页 - 产品信息
VITREK 964i耐压高压开关系统
所属类别:安规测试仪
产品简介:The 964i is fast and easy to use so there is no excuse for using the hit-and-miss manual probing method of high voltage multi-point Hipot testing.
  • 产品特点
  • 产品参数
  • 应用说明
  • 功能配置
  • 资源下载

The 964i is fast and easy to use so there is no excuse for using the hit-and-miss manual probing method of high voltage multi-point Hipot testing. The 964i increases operator safety by reducing exposure to high test voltages while enhancing product quality and reliability. Consistent and repeatable hipot test results are automatically documented making it simple to prove compliance with ISO 9000 quality standards.

Setting up the switching pattern for the 964i is a snap. The standard Serial interface port allows the system controller to download, verify and activate any desired switching profile you can dream up. Or if you prefer, an optional GPIB interface is also available. And if programming code is not your ideal way of spending the day, Vitrek QuickTest graphical software can get you up and running in no time at all. For those who are looking for a stand alone system the 964i can be controlled directly by the Vitrek V7X or 950i Series in a PC free environment. So, no matter how you like it - Vitrek puts you in control of your automated high voltage test requirement.

Now that there are no more excuses, isnt it about time you automated your high voltage test application?

Voltage Switching Ratings to 7KV, 10KV or 15KV

          Current switching to 40 or 70 Amps

          Reduces operator exposure to high voltage

          Improves test quality, consistency and repeatability

          Enhances end product quality and reliability

          Scans up to 48 points with single compact unit

          GPIB (optional) - RS232 no extra charge

          May be controlled directly by Vitrek Hipot Tester

          Available QuickTest™ graphical programming software

          CE mark certified to EN 61010

          Made in the USA
 

The below is a schematic representation of two 8 channel scanning modules. One is connected to the high voltage output of the tester and the other to the return sense. This configuration provides bi-polar test capability for the 8 test points. Additional cards and units can be added for greater capacity.

Switch Card Specifications

HV7 Series - 7KV High Voltage Switch Card

  

Maximum Switching Voltage

7kVDC, 5kVAC RMS 50-60Hz

Maximum Switching Current

2A DC or RMS AC

Maximum Switching Power

50 Watts

Relay Switching Time

4mS (from applied coil current)

Relay Configuration

Form A, SPST Normally Open

HV7 Series Switch Card Configuration:

HV7-8R 7KV Single input bus 8 output relays terminated in Red HV terminals,

HV7-8B 7KV Single input bus 8 output relays terminated in Black HV terminals

HV7-4R 7KV Single input bus 4 output relays terminated in Red HV terminals

HV7-4B 7KV Single input bus 4 output relays terminated in Black HV terminals

HV7-MX2 Dual input Single output MUX Card (selectable HV or continuity capability)

 

HV10 Series - 10kV High Voltage Switch Card

Maximum Switching Voltage

11kVDC, 8kVAC RMS 50-60Hz

Maximum Switching Current

2A DC or RMS AC

Maximum Switching Power

50 Watts

Relay Switching Time

4mS including debounce

Relay Configuration

Form A, SPST Normally open

HV10 Series Switch Card Configuration:

HV10-8R 10KV Single input bus 8 output relays terminated in Red HV terminals,

HV10-8B 10KV Single input bus 8 output relays terminated in Black HV terminals

HV10-4R 10KV Single input bus 4 output relays terminated in Red HV terminals

HV10-4B 10KV Single input bus 4 output relays terminated in Black HV terminals

HV10-MX2 Dual input Single output MUX Card (selectable HV or continuity capability)

 

HV15 Series High Voltage Switch Card:

Maximum Switching Voltage

15kVDC, 10kVAC RMS 50-60Hz

Maximum Switching Current

2A DC or RMS AC

Maximum Switching Power

50 Watts

Relay Switching Time

4mS including debounce

Relay Configuration

Form A, SPST Normally open

HV15 Series Switch Card Configuration:

HV15-8R 15KV Single input bus 8 output relays terminated in Red HV terminals,

HV15-8B 15KV Single input bus 8 output relays terminated in Black HV terminals

HV15-4R 15KV Single input bus 4 output relays terminated in Red HV terminals

HV15-4B 15KV Single input bus 4 output relays terminated in Black HV terminals

HV15-MX2 Dual input Single output MUX Card (selectable HV or continuity capability)

HC-4 40 Amp High Current Source & Sense Switch Card
 

Maximum Input Voltage

700 VDC, 50 VAC RMS

Maximum Switching Voltage

277VAC, 30VDC

Maximum Current

40A DC or RMS AC

Relay Switching Power

500 Watts

Card Configuration

4 channels of high current relays and 4 channels of sense relays

Relay Configuration

All Form A, SPST Normally open

HC-4 High Current Switch Card Configuration:

HC-4R 4 HC Source & 4 sense relays terminated in Red Terminals.
HC-4B 4 HC Source & 4 sense relays terminated in Black Terminals.
 

HC-7 70 Amp High Current Source & Sense Switch Card

Maximum Input Voltage

700 VDC, 500 VAC RMS

Maximum Switching Voltage

277VAC, 30VDC

Maximum Current

70A DC or RMS AC

Relay Switching Power

500 Watts

Card Configuration

4 channels of high current relays and 4 channels of sense relays

Relay Configuration

All Form A, SPST Normally open

HC-7 High Current Switch Card Configuration:

HC-7R 4 HC Source & 4 sense relays terminated in Red Terminals.
HC-7B 4 HC Source & 4 sense relays terminated in Black Terminals.
 
General Specifications

Switch Card Capacity

Holds up to 8 switch cards

High Voltage Terminals

All HV terminals are 15KV rated and supplied with mating connector,   optional HV leads sets available on request

Remote Interface

GPIB optional, RS232 standard

Indicators

Full LCD Display

Diagnostics

Built-in self diagnostics test ROM and RAM 

Operating Temperature

0°C to 50°C

Humidity

80% RH 0°C to 40°C

Power

115/230 VAC +/- 10% VA max

Dimensions

89mmH x 432mmW x 485mmD (3.5"H x 17"W x 19"D)

Weight

12Kg (27 lb.)   Net/16Kg (36 lb.) Shipping

Standard Accessories

Operators manual, hipot connection test leads and power cord

Warranty

1 year parts and labor

Safety

CE mark certified to EN61010
 


关于我们产品信息应用解决方案技术支持与售后服务重点客户联系我们

 英国牛顿科技N4L -  日本岩通计测IWATSU - 英国LA - 德国PMK - 日本APOLLOWAVE - 德国 DR HUBERT  中国总代理商  

页面版权所有 长沙力高捷创仪器有限公司 《中华人民共和国电信与信息服务业务经营许可证》 编号:湘ICP备19020595号  

地址:湖南省 长沙市雨花区韶山南路亚商国际大厦A座2524室   联系电话: 0731-85260926  传真:0731-85263946

CASCADE射频微波探针|APOLLOWAVE半自动功率探针台探针卡|VITREK 安规/高压表|PEM CWT探头|PSM1700频率响应|PEARSON电流探头|IWATSU 曲线图示仪|PMK高压探头




收缩